88
Compatible Direct
Mount Bracket
Flanged nut (3 pcs.)
Compatible Direct
Mount Bracket
Waterproof Packing
1 . Be sure to remove the waterproof packing, hexagon bolts and
franged nuts from the Compatible Direct Mount Bracket.
2. Insert the mounting screws of the product into the Compatible
Direct Mount Bracket.
See the figure on the left for details on the direction of insertion.
3. Secure the product with the flanged nuts (3 pcs.)
from underneath the Compatible Direct Mount Bracket.
4. Place the waterproof packing in line with the mounting hole.
5 . Run the wiring through the distribution hole.
Secure the Compatible Direct Mount Bracket with M4 screw (2 pcs.).
※
M4 screw is not included.
Be sure to prepare mounting screws separately, and consider the
screw threadto be 14 mm or less in order to attach the Compatible
Direct Mount Bracket, and the board thickness of the mounting surface.
M4×14
M4 Screw (2 pcs.)
Product Attachment (SZW-950U Mounting Hole B)
0.6 N m
Recommended Torque
Installation using materials other than the specified
accessories is not covered under warranty.
N o t i c e
Recommended Screw
0.6 N m
Recommended Torque
Do not use if twisting, etc., has occurred in the
waterproof packing.
Failure to comply will result in lower waterproofing
performance. Possible cause of failure may occer.
N o t i c e
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
