47
LED Unit Topside View
Lens
Tab
Tab
Groove
Groove
C a u t i o n
1
2
If the LED Unit cannot attach properly, check that the tabs inside the LED Unit are fitted inside the groove.
If the tab is outside of the groove as shown below, refer to the next page on how to reposition it.
Also, as shown below, tabs may come off the groove when removing the LED Unit, depending on how it is removed.
If the product is installed again in this condition, it may become damaged.
Do not remove it as the improper procedure depicts it below.
A condition occurs in which the lens tab is out of the groove.
If the product is installed again in this condition, it may become damaged.
When detaching
units in the middle.
Hold the upper LED’s
firmly and remove the
lower LED Unit from
the rest.
The lens tab is located
out of the groove.
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
