2
Warning
Notice
Caution
NOTES TO BE OBSERVED FOR SAFE OPERATION
Warning
Caution
Indicates an imminently dangerous condition:
failure to follow the instructions may lead to
death or serious injury.
Indicates a potentially dangerous condition:
failure to follow the instructions may lead to
slight injury or property damage.
●
To prevent from
short-circuits, electric shock or damage
, observe the following:
- Be sure
the power is disconnected
before replacement or repair, including the replacement of the fuse.
- Use this product in
a properly maintained condition.
(Replace or repair if the body, LED unit, etc. are damaged.
)
●
Request the installation and wiring be performed by
a professional contractor
if construction work is involved.
Failure to comply may result in
fire, electric shock or falling from high places possible cause of failure may occur.
●
Avoid long exposure to the Buzzer sound from a close distance.
Failure to observe this may lead from irritation to
permanent damage to the ears. ( Flashing/Buzzer)
●
In order to maintain protection of this product against dust and waterproofing performance,
be sure to use the head
cover, LED unit and buzzer unit in the condition that it was originally attached.
●
Do not operate this product without
the O-ring or the waterproof packing material. Failure to comply will result in
lower waterproofing performance. Possible cause of failure may occur.
●
Do not apply voltage to the Flashing Common line
( , ).
Apply voltage to the power source line
( ) only. Product failure will occur.
●
When removing covers or packing from the equipment, which is attached to this product, be careful
not to snag
the
product. Failure to comply may result in damage to the product.
●
To ensure proper safety while using the signal tower, observe the following:
- Perform
periodic pre-maintenance
.
- As a precaution against problems occurring,
use this product together with other equipment.
●
Be sure to discharge any static electricity
from the body before handling static sensitive parts of this product.
(To prevent damage from static electricity, touch hands or other body parts to metals or an earth ground to discharge
the body from static charge.)
●
Use a soft cloth moistened with water when the LED Unit or body must be cleaned up.
(Do not use thinner, benzine, gasoline or oil.)
●
With a buzzer unit installed, moisture and oil that adheres to the buzzer unit will influence the sound pressure or tone
quality produced, when an abundance is collected on the top surface of the buzzer unit.
Be sure to periodically wipe off foreign objects with a soft cloth, etc.
●
To ensure safety when this product is installed onto equipment, observe the following:
-
Do not remove parts
beyond those designed to be removed from this product.
-
Do not modify or disassemble
this product.
- Use only
the specified replacement parts
listed in this manual.
In order to prevent any damage to the user and other personnel or to assets, note the following:
■
The indications for warning are divided into the following classes according to the degree of danger or damage incurred
when the warning is not taken into consideration and the product is not correctly used.
B
0 2
0 1
M 2
1
Safety Precautions
1
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
