patio NPC05, Руководство по сборке

Страница: 16 / 28

Step 13: Figure #13
You can now attach the heater reflector
with the three 8 mm flat washers and wing
nuts provided.
(See Figure #13)
Figure #14
Step 14:
Be sure the to attach the blue colored
protective rubber plug onto the fitting
before inserting it into the gas inlet
in the post. The blue plug is designed to
keep insects, dust, debris, moisture, and
other contaminants out of the feed line,
valve assembly, and pilot assembly.
(See Figure #14)
Figure #15
Always be sure to use the dust plug when the heater is not in use.
(See Figure #15)
Please Note:
The end of the hose set that attaches to your
home natural gas supply also has a quick
disconnect coupler and state of the art shut-
off safety valve for your safety and
convenience. As an added feature when the
“ON and OFF” black control knob on the
shut-off valve is in the “ON” position you
cannot inadvertently remove the hose
from the coupler while the heater is in
operation.
(See Figure #16)
Figure #16
©
AEI CORPORATION 2005
16