You will need the following tools and materials to assemble the heater:
Teflon tape or gas sealant/pipe compound
Adjustable crescent wrench or socket Driver
Standard Phillips Head #3 screw driver
Channel Locks or Pliers-Minimum 1 ½” capacity
Soapy water solution for leak testing
Do Not Use
any Teflon tape or other sealants when connecting flare-to-flare connections. All
male pipe thread connections will require Teflon tape or other approved sealant. Teflon tape
FOR NATURAL GAS works the best and is the easiest to use.
Fastener Identification
Heater
8 – Pan Head Screws M6 x 12 mm S/S
8– Flat Washers 6mm dia.
8– Lock Washers 6 mm dia
4 Pan Head Self-taping Sheet Metal Screws.
Make
sure there are no cracks in the hose, cuts, or
other abrasions, which might cause a fuel leak.
If the hose, couplers, heater valve, or natural gas
regulator assembly is found to be faulty in any way
PLEASE NOTE:
The proper assembly of this
heater requires basic mechanical skills. Proper
assembly and installation is the responsibility
of the customer. All repair or services should
be done by a qualified gas appliance
technician.
DO NOT USE t
he appliance. Call your authorized
Patio Comfort
dealer and only use genuine
Patio
Comfort
replacement parts. Using improper parts
may damage the product or cause physical or
property damage.
Warning!!!
Improper installation, adjustment, alteration, service, or maintenance can cause
property damage, injury or death. Read the assembly, installation, operating, and
maintenance instructions thoroughly before use, installing or servicing the
appliance. This heater is for outdoor use only.
Warning!!!
Do NOT store or use gasoline or any other flammable vapors and
liquids in the vicinity of this or any other appliance.
©
AEI CORPORATION 2005
10
FOR YOUR SAFETY: If you smell gas:
1. Shut off gas to the appliance
2. Extinguish any open flames
3. If odor continues, immediately call your gas
supplier.
Содержание NPC05
Страница 8: ...AEI CORPORATION 2005 8...