pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 30 / 62

October 2021
23
PWPP HH P1 - Manual
Disabled
UP DOWN NEXT
→
Accept Risk
UP DOWN NEXT
• The next screen will allow you to SAVE the new value for this property, or ESC or cancel and return to the previous
level.
Accept Risk
SAVE ESC
→
Enabled
EDIT ESC
• Once saved, return to the Gateway Config menu and cycle through menu items to find the Receive Protocols you
wish to enable: Pathport RX , ShowNet RX , ETC Net2 RX , Art-Net RX , and E1.31 sACN RX .
E1.31 sACN RX
NEXT OK ESC
→
Enabled
EDIT ESC
• Configure the Port Direction to Input or Output and patch a standard universe (i.e., UNIV 1). See the Front Panel UI
and Menu section for details on how to use the other menu functions.
WARNING ABOUT UNSECURED PROTOCOLS
You are enabling an open protocol that does not use encryption or authentication. These protocols
could be eavesdropped or spoofed by malicious parties. You are strongly encouraged to use Pathway
ssACN, and secure access to your network, both physically and technologically. To use unsecured
protocols, you must acknowledge that you have read this statement and accept these risks.
If you do open Pathscape, any devices secured this way shown as
Read Only
.
If you want to configure or patch custom universes to this device or use a PC for further configuration, you must use the front
panel to
Factory Default settings, then use Pathscape to add it to a Security Domain.