pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 11 / 62

PWPP HH P1 - Manual October 2021
4
PANEL LAYOUTS
FRONT PANEL
Hanging Bracket (Included)
3 Button Interface
RJ45 Ethercon
XLR5F DMX Connector
Battery Compartment
Battery Compartment
Screws (x2)
LCD Screen
Safety Attachment Ring
LCD
The Pathport Hand Held has a 2-line, 16-character backlit LCD.
PWPP HH P1
Univ1 LiveOut
The upper line of the display will show the gateway’s name (if set in Pathscape), or the device’s IP address. The lower line will
show the Universe number or patch name and the DMX status.
By default, the backlight is off, except when pressing any of the 3 buttons. Pressing any button again will enter the menu
system.
If desired, the backlight can be set to be always on, by setting a property in Pathscape. See Software Configuration below
for more information.
BUTTON INTERFACE
The three buttons below the LCD provide menu navigation.
Gateway Config
NEXT OK ESC
Typically, the leftmost button is “NEXT” and will cycle through menu items. The middle button is “OK” and will accept the
currently selection option or enter the next menu level. The rightmost button is “ESC” and will exit out of the current menu
item, or return to the previous menu level, without making changes.
Configuration changes must be saved by pressing the “SAVE” button to take effect. Pressing the ESC button or allowing
battery timeout will cause changes to be lost.