pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 28 / 62

October 2021
21
PWPP HH P1 - Manual
RETAINING DEVICE SETTINGS FROM UNKNOWN DOMAINS
In the unlikely event that you don’t know the password of a Security Domain, but you’d like to retain all its configuration, try
the following:
Without logging in to a Domain, all devices that appear with amber padlocks are read-only . Save a show file, and the
configuration of all devices is saved. You can then factory default the devices using the prescribed method.
See the Pathway website, under Support > Reference Articles > Factory Defaulting Ethernet Devices for detailed
instructions.
Once they reappear in Pathscape as Ready to Secure , add them to a Security Domain and log in. Once all devices
appear with a Green Padlock , open the show file and Send All Transactions to restore the network configuration and
patch.
USING OLDER VERSIONS OF PATHSCAPE WITH NEW DEVICES
If you use Pathscape 1 or Pathscape 2 with devices shipped after January 1, 2020 (Version 5 firmware or later) , you will
not be able to configure them. You must use Pathscape 4 or later . As a reminder, the device label will appear in the earlier
versions of Pathscape as “ Use latest Pathscape PC software to secure ”. Other properties will be shown and are correct,
but any attempts to change them will fail.