pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 15 / 62

PWPP HH P1 - Manual October 2021
8
SECURITY DOMAINS
To simplify the process of managing security on your network, Pathscape introduced the concept of a “ Security Domain ”.
Below we will describe how to create a Security Domain and add or remove devices from it. In the Device tab of Pathscape
there is a column that shows you the name of the devices’ domain and a padlock icon showing their current state.
There are several different ways a device can appear in the Security Domain column.
RED PADLOCK - “Ready to Secure” device (previously
“Unsecured”)
Prior to Pathscape version 4.1, this was shown as “ Unsecured ”.
Any device shipped after
January 1, 2020
will have version 5 or later firmware which
includes security. These devices will report their type, name and firmware version
only
.
All other properties cannot be read until you add them to a Security Domain (see below
on creating domains).
AMBER PADLOCK - “Other Domain” name showing device
Devices that have been added to a security domain will appear with an amber padlock. These devices will allow you to read
all their properties and even save a show file with the network setup, but the properties are Read-Only. You will have to login
to the domain to set any properties. (See
Login procedure below.)
AMBER PADLOCK - “Read Only” (previously “Locally Secured”)
Prior to Pathscape version 4.1, this was shown as “ Locally Secured ”.
Read Only
means the front panel was used to create a unique (and hidden) password to allow front-panel-only configuration.
To gain read/write privileges with Pathscape, you
must Reset Security
settings from the front panel and then add it to the
Security Domain using Pathscape.
GREEN PADLOCK - “My Domain” shows devices in the current domain
Once you have logged into a Security Domain with a password, any device in your domain will appear with a green padlock
and all their properties will be Read/Writable.
EMPTY SECURITY DOMAIN CELL – Firmware version prior to 5�0 - device shipped
prior to January 1, 2020
If the Security Domain cell is empty, this device is using Version 4 firmware and cannot be secured. Pathscape 4 will be able
to read and write properties exactly like earlier versions of Pathscape. If you upgrade to version 5 or later firmware, the device
will appear with a red padlock and you will need to add it to a domain before you can use it.