![background image](http://html1.mh-extra.com/html/passtech/zp100wr/zp100wr_user-manual_3899030008.webp)
Version 1.2
- 8 - 2010-10-06
Lock will check the lock ID and key of the user card (or any form of user key).
Lock will emit Green LED and beep sound once.
Bolt will be moved and locker will open.
User information will be erased from the lock so that new user can use the
empty lock.
☞
In free selection mode, lock and card needs to read and write the each
other
’
s information. So please do not sway the card until the latch is moved.
3.3.2 Fixed Mode (Pre-Assigned Mode)
The initial status of the lock in Fixed Mode is closed status (bolt out)
- Open and close the lock -
Put the User Card to the front body of the assigned lock.
Lock checks the card, and green LED lights and beep sound once. Then, lock
will be opened, and closed again in 5 seconds.
To close the locker, just close the door. Lock will remains the closed status.
3.3.3 Replacing old User card with New User card
(1) Free Selection
Issue new user card by LOS (Locker Operation System) program.
In case the locker is closed, put
Master card
to the lock to open the lock.
Put new User card to the lock, then lock will accept new User card, and missing
card will not be accepted.
In case the locker is opened, just put the new user card to the lock, and the
lock will register this locker number. Old User key will not be accepted.
(2) Fixed Mode
Issue new User card (with assigned locker Number) for Fixed Selection.
Put Master Card to the lock to delete the old user card, and put the new User
card to the lock.
Lock will accept the new user card only, and old user card registration will be
deleted.
In case the lock is set for multiple users, lock revision should be updated when