Passap ELECTRONIC 8000, Руководство по эксплуатации

Страница: 58 / 266

Kn itting a pattern sector
The preparation rows
The following display always appears after the START POSITION display
i.e. either directly afterwards if you have entered a row number other than zero
when switching on the machine,
or after you have entered the knitting width, if your absolute row counter reading is
zero.
It also appears if you have altered the knitting row with the RWS key during knitting
because you had, for instance, to unravel several rows. Please refer also to page
1 4 6 .
v SX A
SX
YARN
NEEDLES AND JAC KS
TO D IAGRAM
GO
STOP
56
These two preparation rows are always necessary when you
son: as the cam box travels
rought into the position
want to knit a new pattern. Rea
from left to right, the jacks are b
necessary for knitting the next r ow.
Set the pattern discs to S and the N-X levers to X. (Please
refer to page 1 1 ).
Set the color changer to Neut
ral Position, press the black
er holder if there is a feeder
o page 20).
key i n front of the empty feed
In the cam box.
(Please refer t
Push into work position thos e needles and jacks which
ntered. (For work position comply with the knitting width e
please refer to page 1 4).
Start the motor by pressing t
he GO/STOP key.
Now the cam box moves to the
order to deposit the feeder, if th
right into the color changer in
ere is one in the cam box .
performed after which the Then the first preparation row is
cam box will stop at left, to allo
w you to make the color
changer ready for the new patte rn.