Passap ELECTRONIC 8000, Руководство по эксплуатации

Страница: 76 / 266

Programming a pattern sector
Inverting front to back
This question appears for each technique, even if it is a single-bed technique, or if
you knit without any pattern.
PROG. SECTOR
3
N UMBER OF COLORS
+2+
v I A I NVERT t2t NO
74
1 st line:
This line shows you the pattern sector you are currently
programming.
2nd line
This line only appears if you have programmed one of the
techniques
, which allow you to enter whether you want to
knit a 2, 3 or 4 color fairisle.
3rd line
This line allows you to enter if what is to be knitted on the
front bed should be knitted on the back bed and vice
versa.
For single bed patterns you can decide at this point whether
you wish to knit on the front bed (this being the default feature
for every single bed technique) or on the back bed .
For fairisle patterns the actual image is usually knitted on the
ENT
front bed so that the rear face of the knitting is created on the
back bed. You can reverse this
A
tuck usually appears on the back bed, but this can also be
changed, allowing you to knit tucks and fairisle patterns in the
same piece of knitting without transferring stitches .