Passap ELECTRONIC 8000, Руководство по эксплуатации

Страница: 94 / 266

Actions d u ri ng kn itti ng
Allocation of feeder functions
I n the techniques i s programmed which feeder i s to be used for which row. ( See
also page 21 ) This makes it possible to control, that there is always the right
feeder in the carriage.
The general rule is the following:
1 color techniques are knit with feeder number 1
2 color techniques are knit with feeders number 1 + 2
3 color techniques are knit with feeders number 1 , 2 + 3
4 color techniques are knit with feeders number 1 , 2, 3 + 4
The feeders are numbered starting from the left.
Should one of the feeders be inoperative for some reason, instead of being unable
to knit the chosen technique you can change the feeder allocation as follows :
If you work normally with all feeders the display is the fo ll ow i ng ·
FEEDER
t 1 t
FEEDER
1
FEEDER
• 1 +
FEEDER
2
�
FEEDER
•2+
FEEDER
3
4
92
FEEDER
•3+
+
FEEDER
•4+
It is possible to block one or more of the feeders :
When the corresponding input field is activated press
CLR
Now this feeder cannot be used anymore until you type
again the original number in the now empty input field.
Note : If the blocked feeder is not number 4 it is necessary to
change the allocation of the feeder functions, to make the
best possible use of the remaining feeders .