Passap ELECTRONIC 8000, Руководство по эксплуатации

Страница: 63 / 266

Kn itting a patte rn sector
I n certain cases, when the new pattern has less colors than
the previous pattern, it might be that you can only prepare the
color changer two rows
l ate r .
Please refer to "Preparation of the color changer" on page
2 0 .
GO
When the color changer is ready,
STOP
press
GO
v
LX
" LX
to have the last row of the previous pattern knitted
Then the cam box setting for the new pattern sector will
a ppea r .
HANDLE DOWN
NEEDLES AND JACKS
TO DIAGRAM
GO
Fol low the instruct1ons in the display and press GO/STOP to
STOP
kn1t the new pa tt e rn .
The following rule can be derived from the above descript1on
To be able to knit pattern sector 1 to 9,
press the "KnitS" key two rows before the
desi red pattern change.
If you forget to press the "KnitS" key two rows in a dva nc e ,
proceed according to the description given for the pattern
sector zero on page 56
.
(I. e . bring the color changer to the neutral position, press the
COL key and enter zero according to page 91 , set cam box
to SX/SX and carry out 2 rows as zero rows
6 1