Paso AX6120 Скачать руководство пользователя страница 41

DATASHEET

AX6000 SERIES

41 

WARRANTY

This product is warranted to be free from defects in raw materials and 

assembly. The warranty period is governed by the applicable provisions of 

law. Paso will repair the product covered by this warranty free of charge 

if it is faulty, provided the defect has occurred during normal use. The 

warranty does not cover products that are improperly used or installed, 

mechanically damaged or damaged by liquids or the weather. If the 

product is found to be faulty, it must be sent to Paso free of charges for 

shipment and return. This warranty does not include any others, either 

explicit or implicit, and does not cover consequential damage to property 

or personal injury. For further information concerning the warranty contact 

your local PASO distributor.

Important!

 Should the user wish to avail himself of servicing under the 

warranty, he must provide evidence of the purchase (invoice or receipt). 

The user shall also indicate the date of purchase, model and serial number 

indicated on the equipment. For this reason, you should complete the box 

below as a reminder of the data required.

GARANZIA

Questo prodotto è garantito esente da difetti nelle sue materie prime e 

nel suo montaggio; il periodo di garanzia è regolamentato dalle norme 

vigenti. La Paso riparerà gratuitamente il prodotto difettoso qui garantito se 

il difetto risulterà essersi verificato durante l’uso normale; la garanzia non 

si estende quindi a prodotti usati ed installati in modo errato, danneggiati 

meccanicamente, danneggiati da liquidi o da agenti atmosferici. Il prodotto, 

risultato difettoso, dovrà essere inviato alla Paso franco di spese di 

spedizione e ritorno. Questa garanzia non ne comprende altre, esplicite 

od implicite, e non comprende danni o incidenti conseguenti a persone o 

cose. Contattare i distributori PASO della zona per maggiori informazioni 

sulla garanzia.

Importante!

 L’utente ha la responsabilità di produrre una prova d’acquisto 

(fattura o ricevuta) se vuole servirsi dell’assistenza coperta da garanzia. 

Dovrà inoltre fornire data di acquisto, modello e numero di serie riportati 

sull’apparecchio; a questo scopo, compilare come promemoria dei dati 

richiesti lo spazio qui sotto.

MODELLO / MODEL: .............................................................................................................................................................................................

NUMERO DI SERIE / SERIAL NUMBER: ..................................................................................................................................................................

DATA D’ACQUISTO / PURCHASE DATE: .................................................................................................................................................................

GARANTIE

Für dieses Produkt wird eine Garantie für Rohmaterialfehler und 

Montagefehler gewährt; die Garantiezeit unterliegt den gültigen gesetzlichen 

Bestimmungen. Paso repariert das  garantierte Produkt kostenlos, wenn 

sich herausstellt, dass der Defekt während des normalen Gebrauchs 

aufgetreten ist; die Garantie erstreckt sich demnach nicht auf Produkte, 

die falsch gebraucht und installiert oder mechanisch, durch Flüssigkeiten 

oder Umwelteinflüsse beschädigt wurden. Das defekte Produkt muss franco 

Versandkosten für den Hin- und Rücktransport zu und von Paso gesendet 

werden. Diese Garantie schließt keine weiteren, expliziten oder impliziten 

Leistungen und Folgeschäden an Personen, Gegenständen oder Unfälle 

ein. Bitte wenden Sie sich an PASO-Fachhandel in Ihrer Gegend, wenn 

Sie weitere Informationen zu dieser Garantie wünschen.

Wichtig!

 Der Kunde muss einen Verkaufsbeleg (Rechnung oder Quittung) 

vorlegen, wenn er Serviceleistungen, die unter die Garantie fallen, in Anspruch 

nehmen möchte. Er muss zu diesem Zweck außerdem das Kaufdatum 

angeben sowie das Modell und die Seriennummer, die auf dem Gerät 

vermerkt sind.  Diese Daten müssen in den unten stehenden Textkasten 

GARANTIE

Ce produit est garanti comme étant exempt de défauts de matières 

premières et de fabrication. La durée de la garantie est conforme aux 

normes en vigueur. Paso réparera gratuitement tout produit défectueux en 

garantie dès lors que l’anomalie se vérifiera dans le cadre d’une utilisation 

normale du produit. La garantie ne couvre donc pas les produits utilisés et 

installés de façon erronée, endommagés mécaniquement ou encore souillés 

par des liquides ou des agents atmosphériques. Le produit défectueux 

devra être envoyé à Paso franco de frais d’expédition et de réexpédition. 

La présente garantie n’en inclut aucune autre, explicite ou implicite, et ne 

couvre pas les lésions ou dommages causés aux personnes ou aux choses. 

Pour plus d’informations sur la garantie, veuillez contacter le distributeur 

PASO de votre zone.

Important!

 L’utilisateur devra présenter une preuve d’achat (facture ou 

récépissé) pour pouvoir bénéficier de l’assistance en garantie. Il devra par 

ailleurs fournir la date d’achat, le modèle et le numéro de série reportés sur 

l’appareil. Veuillez à cette fin remplir le mémento des données demandées 

dans le cadre ci-dessous.  

MODÈLE / MODELL: .............................................................................................................................................................................................

NUMÉRO DE SÉRIE / SERIENNUMMER:..................................................................................................................................................................

DATE D’ACHAT / DATUM DES ERWERBS:...............................................................................................................................................................

GARANTÍA

Este producto está garantizado libre de defectos en sus materias primas y 

en su montaje; el periodo de garantía se rige por las normas vigentes. La 

Paso reparará gratuitamente el producto defectuoso aquí garantizado si el 

defecto resultará haberse presentado durante el uso normal; la garantía 

no ampara pues los productos utilizados e instalados de manera errónea, 

dañados mecánicamente, dañados por líquidos o por agentes atmosféricos. 

El producto, que haya resultado defectuoso, deberá ser enviado a  la Paso 

con portes pagados de envío y de vuelta. Esta garantía no incluye otras, 

explícitas o implícitas, y no incluye daños o accidentes consiguientes a 

personas o cosas. Contactar con los distribuidores PASO de la zona para 

más información acerca de la garantía.

¡Importante!

 El usuario tiene la responsabilidad de presentar una prueba 

de compra (factura o recibo) si desea utilizar la asistencia amparada por 

la garantía. Deberá así mismo demostrar la fecha de compra e indicar el 

modelo y el número de serie indicados en el aparato; con tal fin, rellenar 

como memorando de los datos necesarios el cuadro siguiente.

GARANTIE

Dit product is gegarandeerd vrij van materiaal- en constructiefouten; de 

garantieduur wordt geregeld door de geldende wettelijke voorschriften. Paso 

voert de reparatie van de hier gegarandeerde defecte producten kosteloos 

uit, indien blijkt dat het defect tijdens normaal gebruik is opgetreden. De 

garantie heeft dus geen betrekking op verkeerd gebruikte of geïnstalleerde 

producten, producten die mechanisch beschadigd zijn of beschadigingen 

hebben opgelopen door vloeistoffen of de invloed van weersomstandigheden. 

Producten waarbij een defect is geconstateerd dienen franco verzend- en 

retourkosten aan Paso opgestuurd te worden. Deze garantie omvat geen 

enkele andere expliciete of impliciete garantie en dekt geen schade 

aan personen of zaken. Voor verdere informatie over de garantie dient 

contact opgenomen te worden met de dichtstbijzijnde PASO distributeur.

Belangrijk!

 De gebruik(st)er is verantwoordelijk voor het overleggen van 

een aankoopbewijs (factuur of ontvangstbewijs), indien hij/zij gebruik wenst 

te maken van door de garantie gedekte assistentie. Bovendien moet hij/zij 

opgave doen van de aankoopdatum, het model en serienummer, die op het 

apparaat zijn aangebracht. Vul daarom de gevraagde gegevens hieronder 

in, als geheugensteun.

MODEL / MODELO: ..............................................................................................................................................................................................

SERIENUMMER / NÚMERO DE SERIE: ....................................................................................................................................................................

AANKOOPDATUM / FECHA DE COMPRA: ................................................................................................................................................................

Содержание AX6120











































Отзывы: