LOADING THE TOOL
The F2N1-200 2-in-1 tool can be used with either standard 16
GA
flooring cleats or with
15½
GA
flooring staples
.
Loading 16
GA
cleats:
• Use only standard16
GA
L-type flooring cleats in lengths of 1½" (38 mm), 1¾" (44 mm)
or 2" (50 mm) – do not use 18
GA
flooring cleats.
• Insert a row of flooring cleats into the back end of the magazine.
• Pull the slider back completely and release it until it engages behind the cleats.
• To remove cleats from the magazine, pull back completely and hold the slider and tilt the
tool to slide out remaining cleats.
Loading flooring staples:
• Use standard 15½
GA
flooring staples (½" crown) in lengths of 1½" (38 mm), 1¾" (44 mm) or 2"
(50 mm)
.
• Insert a row of flooring staples into the opening on top of the magazine.
• Pull back completely the slider and release it until it engages behind the staples.
• To remove staples from the magazine, pull back completely and hold the slider, tilt the
tool to slide back remaining staples and take them out through the opening.
