®
Wireless Force-Acceleration Sensor
PS
-
3202
6
013-14710C
turned so the X-axis is vertical but pointing downward,
the Acceleration X-axis reading is -1.0 g (where “g”
represents the acceleration due to gravity).
If the sensor is
rotated so that the
Y-axis on the top of
the sensor is vertical
and pointing upward,
the Acceleration
Y-axis reading is 1.0
g. If the sensor is
turned so that the
Y-axis is pointing
downward, the
Acceleration Y-Axis
reading is -1.0 g.
If the sensor is
placed so the back is
on a horizontal
surface with the
label facing upward,
the Acceleration
Z-axis reading is 1.0 g. If the sensor is placed label side
down so that the back is facing upward, the Acceleration
Z-axis reading is -1.0 g.
Mounting the Sensor
Mounting the Sensor on a Rod
Slide the
sensor onto a
rod and
secure it with
the Rod
Clamp
Thumbscrew
as illustrated.
Mounting the Sensor on a PASCO Cart
1. Insert the included Cart/Track Thumbscrew through
the hole in the sensor labeled Cart.
2. Screw the thumbscrew into the threaded hole on the
top of the PASCO cart.
Mounting the Sensor on an IDS Bracket
1. Insert one of the included plastic thumbscrews from
the Force Accessory Bracket through the hole in the
Force Accessory Bracket (PASCO part CI-6545) as
shown.
+1.0 g in X
-1.0 g in X
+1.0 g in Y
-1.0 g in Y
-1.0 g in Y
+1.0 g in Z
-1.0 g in Z
Rod Clamp
Thumbscrew
Cart/Track Thumbscrew