Step 6
Attach Wire Clips (optional)
We’ve included some adhesive-backed wire
clips (H) to keep the power supply cable
neatly tucked behind the frame. Use the
alcohol pad to clean the surface before you
apply the clips so that they stick well. Remove
the backing, and attach where desired. You
may use as many or as few as you like.
Bartendro
TM
B3
-6-
Step 5
Attach Tubing to Dispensers
Turn each tube / compression nut
combo onto the Dispenser until they
are finger tight. You should only see one
or two threads remaining.
Attach the three longest tubes to the
right side of each dispenser (F). Then
feed them through the holes in the
faceplate. These are the inputs tubes.
Attach the shorter output tubes to the
left side of each dispenser (G). The
longest of these goes to Dispenser 1,
the second longest goes Dispenser 3,
and the shortest to Dispenser 2.
Insert the output tubing into the spout
until it reaches the bottom, but isn’t
showing.
H
1
2
3
F
(3X)
G
(3X)
1
3
2
