Bartendro
TM
B3
-7-
Step 8
Insert Tubing into Bottle
While Bartendro is booting up, you can load
your bottles for dispensing drinks.
Insert the input tubes into the opened bottles
so that they reach the bottom.
You’ll know Bartendro is ready when the
Dispenser’s lights begin to fade in and out,
changing color. It normally takes about 1
minute after plugging power in for the system
to be ready to use.
If the lights stay a solid color, or don’t come
on at all, see the Troubleshooting section on
page 11.
Step 7
Power Up
Important:
Before plugging the AC power
cord into the wall outlet, insert the DC plug
(see image at right) into the miniRouter
board.
Then plug the AC power cord into an outlet
for Bartendro to begin booting. When the
time comes to turn off Bartendro, start by
unplugging the AC power cord from the wall
first.
