Center Channel: With the cabinet in a horizontal position, mount the crossover on the bottom of the cabinet
between the two woofer openings. Attach the input wires and install the terminal cup using the same method
described above.
Surrounds: Two crossover boards (1 woofer and 1 tweeter) need to be installed in each satellite cabinet.
Position the cabinet with the woofer facing upward. Mount the crossovers on each side of the cabinet, below
the tweeter holes. The top of the crossover board will partially cover the bottom of the tweeter hole but this
will not effect the mounting of the tweeter. Feed the input wires from both crossovers through the back of the
cabinet. Attach and mount the terminal cup using the same method described above. Again, it is very
important to observe the proper polarity!
B. Install Acousta Stuf
We included two (2) bags of Acousta Stuf. One bag for both left and right speakers (1/2 bag each), a 1/2 bag
for the center channel and a 1/2 bag for both satellite speakers (1/4 bag each). Before placing the Acousta
Stuf in the cabinet it should be kneaded or “fluffed up”. While installing the Acousta Stuff, position the woofer
and tweeter lead wires through their respective driver openings.
Page 7
