FIGURE 3: L/CTR/R crossover mechanical layout.
FIGURE 1: L/CTR/R crossover schematic.
FIGURE 2: Surround crossover schematic.
FIGURE 4: Surround crossover mechanical layout.
3)Crossover Assembly
Warning!! The correct assembly and wiring of the crossovers is critical to the proper operation of this home
theater system. In a worst case situation, an improperly wired network can damage your receiver or amp-
lifier! Please double and triple check all values and wiring before installing the crossovers in the cabinets.
Tips on assembling the crossovers.
1.
Place or “layout” all components on the boards before gluing down. Use the 4" x 6" boards for the left,
center and right crossovers and the 4"x 5" boards for the satellites. The satellite crossovers are on two
boards, one (1) board for the woofer (low pass) and one (1) board for the tweeter (high pass). Each
satellite speaker will need one of each.
Page 3
