Partner PT-6910 Series, Руководство пользователя

Страница: 37 / 56

31
Suspend Mode
The CPU clock will be stopped and the video signal will be suspended if no Power Management events occur
for a specified length of time. Full power will return when a Power Management event is detected. Options
are from 1 Min to 1 Hour and Disabled. The default setting is Disabled.
HDD Power Down
The IDE hard drive will spin down if it is not accessed within a specified length of time. Options are from 1
Min to 15 Min and Disabled. The default setting is 15 Min.
Soft-Off by PWR-BTN
Under ACPI (Advanced Configuration and Power management Interface) you can create a software power
down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install
a software power down that is controlled by the normal power button on your system. If the item is set to
Instant-Off, then the power button causes a software power down. If the item is set to Delay 4 Sec. then you
have to hold the power button down for four seconds to cause a software power down. The default setting is
Instant-Off.
CPU THRM-Throttling
This item allows you to select the CPU THRM-Throttling rate. The default setting is 50.0%.
Resume by Alarm
When set to Enabled, the following two fields become available and you can set the date (day of the month),
hour, minute and second to turn on your system. When set to 0 (zero) for the day of the month, the alarm will
power on your system every day at the specified time. The default setting is Disabled.
Date (of Month) Alarm
When set to “0” the system powers on everyday at the time specified in the “Time (hh:mm:ss) Alarm” field.
Select a date from 1 to 31 for the system to power on at the time specified in the “Time (hh:mm:ss) Alarm”
field. The default setting is 0.
Time (hh:mm:ss) Alarm
Set the time for the system to power on as defined in the ‘Date (of Month) Alarm” field. The time set in this
field must be later than the time in the RTC time as shown in the “Standard CMOS Features” on page 9.
Primary IDE0
When the primary master HDD is working, the system timer will be re-loaded and the system will not go into
suspend mode. The options are: Disabled , Enabled.
Primary IDE1
When the primary master HDD is working, the system timer will be re-loaded and the system will not go into
suspend mode. The options are: Disabled , Enabled.
Secondary IDE0
When the primary master HDD is working, the system timer will be re-loaded and the system will not go into
suspend mode. The options are: Disabled , Enabled.
Secondary IDE1
When the primary master HDD is working, the system timer will be re-loaded and the system will not go into
suspend mode. The options are: Disabled , Enabled.
PCI PIRQ[A-D]#
When the PCI PIRQ[A-D]# has been alerted, the system timer will be re-loaded and the system will not go
into suspend mode. The options are: Disabled, Enabled.