17
1
1
6
6
.
.
3
3
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
S
S
e
e
q
q
u
u
e
e
n
n
c
c
e
e
Determine position of cooker and ant-tilt plate.
Securely fix the anti-tilt plate to the floor with appropriate fasteners.
Fasten the stability bolt bracket to the front frame with the 2 screws
supplied.
Reposition the cooker back into the anti-tilt plate and then mark the
position of the stability bolt hole.
Pull the cooker back out and drill the bolt location hole. Use a 10mm
masonry or wood drill. When drilling into concrete ensure a minimum
hole depth of 30mm.
Reposition the cooker back into the anti-tilt plate, aligning the stability
bolt bracket with the 10mm drilled hole. Then slide the bolt through the
bracket and into the hole.
Connect Electricity supply/gas supply but do not turn on until installation
is completed.
Slide the cooker back into the anti-tilt plate so that rear cover rests against the rear wall. Then check the height and
level of the cooker. If required, pull the cooker back out and adjust the leveling feet as required.
Anti-tilt
plate
Stability bolt
