4
3. INSTALLING THE APPLIANCE
The appliance must be installed by a qualified technician and according to the regulations in force. This
appliance could be freestanding or built-in. It can also be installed next to a wall which is higher than the
appliance, with a minimum distance of 150mm from the side of the appliance, as shown in the drawing
below. Any wall cupboards or shelves must be at a distance of at least 750mm above the work surface.
FS 600-GAS GAS
The cooker is supplied with an anti-tilting chain to prevent the appliance from
tilting forward and any accidental damages to the gas pipe. Take the
expansion with the hook and make an adequate hole in the wall behind, at
the same height as the chain fixation area. Insert the plug into the hole and
then screw in the hook until it is fixed to the wall. Fix the chain to the hook.
Adjust to the level of the cooker inserting the foot provided with some
models.
WARNING:
Prior to installation, ensure that the nature of the gas, the gas pressure, and the adjustment of the
appliance are compatible.
The adjustment conditions for this appliance are as stated on the data plate.
Check that this appliance is not connected to a ventilation/extraction device. It shall be installed and
connected in accordance with current installation regulations, with particular attention to the relevant
ventilation requirements.
