EN
Battery Charging
Your aircraft comes with a DC balancing charger and 2S Li-Po battery.
You should only charge your battery with the included charger. Never leave the
battery and charger unattended during the charge process. Failure to follow
the instructions properly could result in a fi re. When charging, ensure the
battery is on a heat-resistant surface. Charge the fl ight battery while
assembling the aircraft. Install the fully charged battery to perform control
tests and binding.
DC Li-Po Balancing Charger Features
• Balances and Charges 2-cell lithium-polymer battery packs
• LED charge status indicator
• 12V accessory outlet input cord
Purchase optional 12V adapters (HBZ6513 or HBZ4747) to power your
charger more conveniently.
Charger Specifi cations
• Input power: 10-14V
• Charges 2-cell Li-Po packs
with a minimum capacity
of
1300mAh.
The Battery Charging Process
1.
Charge only batteries that are cool to the touch and are not damaged. Look at the battery to make sure it is not damaged e.g., swollen, bent, broken
or punctured.
2.
Insert the charger into the appropriate power supply (12V accessory outlet).
3.
Connect the balancing lead of the battery to the charger port.
4.
The LED will fl ash during charging.
5.
The LED will glow solid when the battery is fully charged (approximately 1 hour).
6.
Always disconnect the battery from the charger immediately upon completion of charging. The LED will turn off.
CAUTION
: Overcharging a battery can cause a fi re.
CAUTION
: Only use a charger specifi cally designed to charge a Li-Po battery. Failure to do so could result in fi re causing injury or property damage.
CAUTION
: Never exceed the recommended charge rate.
NOTICE:
If using a battery other than the included Li-Po battery, refer to your battery manufacturer’s instructions for charging.
• Maximum charge rate 1C
(1.3
amps)
7.4V 2S 1300mAh Li-Po battery
(EFLB13002S20)
The E-fl ite 2S Li-Po battery pack
features a balancing lead that
allows you to safely charge your
battery pack when used with the
included ParkZone Li-Po balancing
charger.
CAUTION:
The balance
connector must be inserted into the
correct port of your charger prior to
charging.
4
