Go! Go! Smart Wheels
™
Ambulance
User’s Manual
BATTERY INSTALLATION
1.
Make sure the unit is turned
OFF.
2.
Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen
the screw.
3.
Install 2 new “AAA” (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4.
Replace the battery cover and tighten the
screw to secure.
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
Attention : Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
NOTE:
Please keep user’s manual as it contains important
information.
BATTERY NOTICE
•
Use new alkaline batteries for maximum performance.
•
Use only batteries of the same or equivalent type as recommended.
•
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
Do not use damaged batteries.
•
Insert batteries with the correct polarity.
•
Do not short-circuit the battery terminals.
•
Remove exhausted batteries from the toy.
•
Remove batteries during long periods of non-use.
•
Do not dispose of batteries in fire.
•
Do not charge non-rechargeable batteries.
•
Remove rechargeable batteries from the toy before charging (if removable).
•
Rechargeable batteries are only to be charged under adult supervision.
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit
ON
, slide the
ON/OFF
SWITCH
to the
ON
( ) position. To turn
the unit
OFF
, slide the
ON/OFF
SWITCH
to
the
OFF
( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the
VTech
®
Go! Go! Smart Wheels
TM
Ambulance
will automatically power-down after approximately 60 seconds without input.
The unit can only be turned on again by pressing the light-up driver button or
pushing the ambulance quickly.
Note:
This product is in a try-me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play.
NOTE:
Ce produit est actuellement en mode démonstration. Une fois déballé,
veuillez éteindre puis remettre en marche ce jouet pour activer toutes
ses fonctionnalités.
ACTIVITIES
1.
Slide the
ON/OFF
SWITCH
to turn the unit
ON
.
You will hear ambulance sounds, a song and
a phrase. The light will flash with the sounds.
2.
Press the
LIGHT-UP DRIVER BUTTON
to
hear ambulance sounds, songs and phrases.
The light will flash with the sounds.
3.
Push the ambulance to hear fun sounds and
melodies. While the melody is playing, push
the ambulance again to add in fun sounds on
top of the melody. The light will flash with the
sounds.
1
2
