PARKZONE Habu BNF, Инструкция по эксплуатации

Страница: 8 / 20

14 15
1. Install your full range receiver in the location shown in the photo using hook and loop tape or
double-sided servo tape.
2. Plug the elevator and rudder Y-harness into the appropriate ports of the receiver. Plug the Y-harness
into the aileron channel of the receiver, and plug the ESC lead into the throttle channel.
When selecting a battery for your Habu we recommend the E-Flite 3200mAh 30C 4-cell battery
(EFLB32004S30) or the Thunder Power 3300mAh 30C 4-cell battery (THP33004SP30).
If using a battery other than those recommended above, it must be able to handle 60-amps
continuously . It should also be roughly the same capacity, dimensions, and weight as the previously
mentioned batteries to allow the battery to physically fit into the airframe and not drastically shift the center
of gravity.
Installing the Receiver
Battery Selection:
General Assembly