PARKZONE Habu BNF, Инструкция по эксплуатации

Страница: 14 / 20

26 27
1. Place landing gear plate without servo and nosewheel onto the fuselage.
2. Make sure the air intake is facing forward as shown in the photo.
3. Install the 8 self-tapping screws for the nose landing gear plate.
Note: Also included are two skids for belly landing. Place the front skid just behind the nose wheel plate.
Place the second skid in front of the exhaust nozzle. This will help protect the bottom of the
airframe for belly landing.
Configuring without Landing Gear Control Direction Test
1. Move the elevator stick on the transmitter to check elevator pitch control. When the stick is pushed
forward, the elevator should move down.
2. When the elevator stick is moved aft the elevator should move up.
3. Move the aileron stick to check aileron roll control. When the stick is pushed to the left, the left aileron
should move up and the right aileron should move down.