PARKZONE Habu BNF, Инструкция по эксплуатации

Страница: 13 / 20

24 25
1. Snap the main gear into the landing gear plates on the wing. Make sure wheels are facing out and
struts are facing in.
2. Select the nosewheel plate with the servo and nosewheel steering arm installed. Plug the servo into
the servo extension inside the nose cavity, and attach plate to fuselage with the 8 included
self-tapping screws.
Note: Make sure the air intake is facing forward.
3. Insert nose wire into the nosewheel plate attached to the fuselage making sure to have the flatspot on
the wire aligned with the setscrew. Tighten setscrew with included 1.5mm hex wrench.
Installing the Landing Gear
The Habu was intentionally designed to provide the choice to fly with or without landing gear. If you prefer
to fly at the highest speed or in the most precise manner, we recommend flying without the LG installed.
You will find it is very sleek and fast, as the drag is decreased.
If you choose to enjoy the terrific experiences of ROGs, touch and goes, and scale-like landings, then it
is very enjoyable to attach the main and nose LG. Of course, you may choose to fly both ways, and we
encourage this by providing two nose plates, one for the steerable nose gear and one to be used for hand
launches and belly landings.
Follow the first section to install landing gear or follow the second section to set up your Habu without
landing gear.