EN
Fly the model at factory settings before making changes. For pilots who wish to
fl y the model with more or less control throw, adjust the position of the linkages
on the servo arms and control horns for increased travel.
Always ensure the steering linkage on the rudder servo arm is correctly
adjusted so the model steers straight when the rudder control is at neutral.
1. Connect the linkage (
A
) to the outermost hole on the elevator
control horn (
B
). You will need to rotate the horizontal stabilizer to attach
the z-bend of the pushrod to the control horn on the elevator.
Tip:
Move the elevator servo arm to full travel. This moves the pushrod
rearward to give the most room to install the horizontal stabilizer. Make sure to
center the servo again before fl ight.
2. Slide the horizontal stabilizer into the slot and align the two pins at the front
of the horizontal stabilizer to the plastic stabilizer mount on the fuselage.
3. Turn the rudder to the right or left and secure the horizontal tail to the
fuselage using a screw (
C
).
When needed, disassemble in reverse order.
C
Installing the Horizontal Stabilizer
Horns
Arms
Elevator
Rudder
Ailerons
Control Horn and Servo Arm Settings
A
B
More control throw Less control throw
Nose
Gear
Steering
9