Parkside PWDS 920 B2, Инструкции по эксплуатации и безопасности

Страница: 20 / 95

18 GB/IE/NI
Locking:
Rotate the lock collar
[ 25]
counter-
clockwise .
Unlocking:
Rotate the lock collar
[ 25]
clockwise .
NOTE
u
The hose stand
[ 27]
protects the vacuum
hose
[ 28]
from excessive bending, when you
place the product on a floor in an upright
position .
˜
Changing the hose adaptor
(Fig . H, I)
NOTES
u
The hose adaptor
[ 29]
with an outer
diameter of 47 mm is pre-installed on the
vacuum hose
[ 28]
. This adaptor can be
directly connected to an industrial vacuum
cleaner without using its extraction hose .
u
Connecting the extraction hose of your
vacuum cleaner to the product: Attach the
hose adaptor
[ 30]
with an outer diameter of
39 mm to the vacuum hose
[ 28]
.
Removing: Use the slotted screwdriver
[ 32]
to press down one of the locking clips on the
dual clip lock ring
[ 36]
.
When the locking clip is fully pressed down,
pull out the dual clip lock ring from the hose
adaptor
[ 29]
. The sealing ring
[ 35]
must be
completely separated .
Attaching:
Insert the sealing ring
[ 35]
into
the hose adaptor
[ 30]
.
Align the holes on the hose adaptor with the
locking clips on the dual clip lock ring
[ 36]
.
Press down one of the locking clips by hand .
Insert the dual clip lock ring into the hose
adaptor . Rotate the hose adaptor by 180°
and repeat the same steps on the opposite
side . Both locking clips must snap into the
holes on the hose adaptor .
˜
Selecting sanding paper
If you need to purchase additional sanding
paper, select sanding paper with following
characteristics:
– Diameter (Ø): 225 mm
– Hook-and-loop fastener on the back
– Pre-punched holes matching the position of
the holes on the sanding pad
[ 2]
– Made of aluminium oxide, silicon carbide
or other synthetic abrasives
The grit size is printed on the back of the
sanding paper . The smaller the number, the
coarser the grain .
Rough sanding: Use a sanding paper with
a small number .
Smooth finishing: Use a sanding paper
with a large number .
In order to obtain best results, start with a
coarse grain first . Complete the process with
the finest grain possible .