Parkside PWDS 920 B2, Инструкции по эксплуатации и безопасности

Страница: 19 / 95

17 GB/IE/NI
m
IMPORTANT!
u
You must fully assemble the product before
using it for the first time!
m
WARNING!
Always pull the power plug before
making adjustments to the product .
˜
Unfolding the shaft
(Fig . C)
Unlocking: Set the folding hinge lock
[ 11]
to
the position .
Hold the shaft
[ 13]
and unfold the front
part until the folding hinge lock
[ 11]
is fully
engaged .
Locking:
Set the folding hinge lock
[ 11]
to
the position .
˜
Attaching the telescopic
extension shaft
(Fig . D)
NOTE
u
The telescopic extension shaft
[ 22]
is suitable
for rooms with high ceilings .
Unlocking: Fold up the lock lever
[ 21]
.
Insert the telescopic extension shaft
[ 22]
into
the connector
[ 14]
(on the main handle
[ 20]
) .
Adjust the length .
NOTE
u
The maximum length is indicated on the
telescopic extension shaft
[ 22]
.
u
Pulling the telescopic extension shaft out
of the main handle
[ 20]
: The
Max
marking
must remain hidden inside the main
handle or be aligned with the edge of the
connector
[ 14]
.
u
Do not pull the telescopic extension shaft
out further .
Locking: Fold down the lock lever
[ 21]
.
˜
Connecting the vacuum hose
(Fig . E, F, G)
m
WARNING!
Always wear a dust mask when
sanding . Using this product generates a
large amount of dust . Harmful dust may
be generated when sanding surfaces
coated with lead-based paint .
NOTES
u
Attach an external dust extraction
unit (e .g . vacuum cleaner) to the hose
adaptor
[ 29] [ 30]
(at the end of the vacuum
hose
[ 28]
) . In this way, you protect yourself
as well as persons in the vicinity from dust
and you keep the workplace clean .
u
You may connect the vacuum hose
[ 28]
to
the connector
[ 14]
on the main handle
[ 20]
or
to the connector
[ 24]
on the rear handle
[ 23]
.
Insert the hose coupler
[ 26]
into the
connector
[ 14]
/
[ 24]
, until it is fully engaged .