65
GB
30. Sight glass
31. Groove
32. Cutting waste bag
33. Extraction port
34. Extraction hose (not included in the scope of delivery)
35. Push stick
36. Wooden push block (not included in the scope of delivery)
4. Scope of delivery
• Operating manual
• Saw blade 24 teeth (pre-mounted)
• Saw blade 48 teeth
• Saw blade guard
• Riving knife with laser unit
• Batteries 1.5 V AAA (2x)
• Parallel stop (including stop rail − pre-mounted)
• Transverse stop (including stop rail − pre-mounted)
• Table width extension (2x)
• Table extension
• Push stick
• Legs (4x)
• Transverse struts (2x)
• Longitudinal struts (2x)
• Rubber feet (4x)
• Tilt protection bar (2x)
• Table support short (2x)
• Table support medium (2x)
• Table support long (2x)
• Cutting waste bag
• Scale
Assembly material
a. Hexagon screw M6x12 (17x)
b. Hexagon screw M6x30 (2x)
c. Hexagon screw M6x42 (2x)
d. Allen screw M6x20 (4x)
e. Coach bolt M6x12 (16x)
f. Slotted-head screw M4x6 (2x)
g. Nut (41x)
h. Washer (43x)
i. Special screw (4x)
j. Hexagon screw M6x20 (2x)
Tools
k. Open-ended spanner 8/10 mm (2x)
l. Allen key 5 mm
m. Open-ended spanner 22 mm (2x)
5. Proper use
The circular table saw is used for the longitudinal and trans-
verse cutting (only with the transverse stop) of all types of
timbers and plastic, in accordance with the machine size. It is
not permitted to cut any type of round timber.
Only suitable saw blades (HM or CV saw blades) may be
used for the machine. The use of HSS saw blades and any type
of cutting wheels is prohibited.
Notes:
Compliance with the regulations, safety instructions, descrip-
tions and notes in this operating manual are part of proper use.
The safety, operating and maintenance specifications of the
manufacturer, as well as the dimensions specified in the operat-
ing manual, must be observed.
Working on or with the product may only be carried out as
described in this operating manual. All other maintenance and
repair work not described in this operating manual must be car-
ried out by a customer service centre.
Please observe that our equipment was not designed with the
intention of use for commercial or industrial purposes. We as-
sume no guarantee if the equipment is used in commercial or
industrial applications, or for equivalent work.
Other general occupational health and safety-related rules and
regulations must be observed.
m
ATTENTION
When using the product, several safety warnings must be ob-
served to prevent injuries and damage. For this reason, care-
fully read the operating and safety instructions. Keep them in
a safe place so that the information is available at all times. If
the product is handed over to another person, hand over the
operating and safety instructions with it. We accept no liability
for accidents or damage that occur due to a failure to observe
this operating manual and the safety instructions.
The liability of the manufacturer and resulting damages are
excluded in the event of modifications of the machine.
Despite use as intended, specific risk factors cannot be entirely
eliminated. Due to the design and layout of the machine, the
following risks remain:
• Contact with the saw blade in the exposed sawing area.
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing protection is
not used.
• Harmful emissions of wood dusts during use in enclosed ar-
eas.
6. Safety information
General power tool safety warnings
m
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed below may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future refer-
ence.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Содержание PTKS 2000 F4
Страница 87: ......