Parkside PHKSA 12 A1, Перевод оригинальной инструкции

Страница: 13 / 50

PHKSA 12 A1 ■ 10 │
GB
│
IE
│
NI
│
CY
Setting the cutting angle
You can select the cutting angle using the cutting
angle scale .
■ Undo the wing screw of the cutting angle
preselector . Set the desired angle on the cutting
angle scale using the top edge of the raised
black metal part (see fig . C) . Retighten the wing
screw .
0
Fig. C: Setting the cutting angle to 45 degrees
Setting the cutting depth
NOTE
► Select a cutting depth of approx . 3 mm more
than the thickness of the material . This ensures
that you achieve a clean cut .
♦ Undo the locking screw and set the desired
cutting depth on the cutting depth scale
using the reference marks (see arrow in fig . D) .
Retighten the locking screw .
Fig. D: Setting the cutting depth
Working with the circular saw
1 . Switch on the appliance – as described in
“Switching on and off” – and then place it
with the front edge of the base plate on the
material .
2 . Align the machine using the rip fence or by
using a marked line .
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The cordless hand-held circular saw is mainte-
nance-free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Never allow liquids to get into the appliance .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ The blade guard must always move freely and
close automatically . Therefore, keep the area
around the blade guard clean at all times . Re-
move dust and chips by blowing them out with
compressed air or with a brush .
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
► Replacement parts not listed (such as batter-
ies, battery charger) can be ordered via our
service hotline .
IB_302329_PHKSA12A1_LB6-.indb 10 29.03.18 13:44