Parkside PHKSA 12 A1, Перевод оригинальной инструкции

Страница: 10 / 50

PHKSA 12 A1
GB
│
IE
│
NI
│
CY
│ 7 ■
saw blade might jam and cause a kickback .
g) Be particularly careful when sawing in exist-
ing walls or other obscured areas.
The inserted
saw blade could get caught on hidden objects
and cause a kickback .
Function of the lower blade guard
a)
Check whether the lower blade guard closes
properly before each use. Do not operate
the saw if lower blade guard does not move
freely and close instantly. Never clamp or tie
the lower blade guard into the open position.
If the saw is accidentally dropped, lower blade
guard may be bent . Raise the blade guard with
the release lever and make sure it moves freely
and does not touch the blade or any other part
at all angles and cut depths .
b) Check the operation of the lower blade
guard spring. Have the saw serviced before
using it if the lower blade guard and spring
are not working properly.
Damaged parts,
sticky deposits or accumulations of chippings
can cause the lower blade guard to operate
slowly .
c) Lower guard may be retracted manually
only for special cuts such as “plunge cuts”
and “compound cuts”.
Raise the lower blade
guard with the release lever and release it
as soon as blade enters the material.
During
all other types of sawing work, the lower blade
guard should function automatically .
d) Always ensure that the lower blade guard is
covering the blade before placing the saw
down on the workbench or floor.
An unpro-
tected, coasting saw blade will move the saw
in the opposite direction to the cutting direction
and saw anything in its path . Always take into
account that the saw blade takes some time to
stop spinning .
Safety guidelines for battery
chargers
■
This appliance may be used by chil-
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks must not be carried out by
children unless they are supervised .
■
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable for indoor use only .
WARNING!
■ Do not operate the appliance with a dam-
aged cable, power cord or mains plug . A
damaged power cable poses a threat of a
fatal electric shock .
Supplementary notes:
■ Do not use any grinding discs .
■ Use only saw blades with diameters corre-
sponding to the label on the saw .
■ Always use the right saw blade for the material
being worked .
■ Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool .
■ Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1 .
IB_302329_PHKSA12A1_LB6-.indb 7 29.03.18 13:44