Parkside PHKSA 12 A1, Перевод оригинальной инструкции

Страница: 12 / 50

PHKSA 12 A1
GB
│
IE
│
NI
│
CY
│ 9 ■
4 . Undo the tensioning screw using a hex key .
5 . Now, remove the tensioning screw and the
clamping flange (see also fig . A) .
Fig. A: Changing the saw blade
6 . Pull the blade guard all the way back using
the release lever and keep the blade guard
in this position .
7 . Remove the saw blade carefully out of the
appliance from below .
5 . Fitting a saw blade is done in the reverse
order .
6 . Press the spindle lock button (until it engages)
and use the hex key to tighten the clamping
screw .
WARNING!
► The arrow on the saw blade must corre-
spond to the arrow showing the direction of
rotation
(running direction shown on the
blade guard ) .
■ Ensure that the saw blade is suitable for the
rotational speed of the tool .
Rip fence
♦ Undo the wing screw for the rip fence and
place the rip fence in the rip fence slot .
♦ Set the desired cut width
using the scale on the rip fence and the cut
out in the base plate (see also fig . B) .
The right recess in the base plate is for a cutting
angle of 0° . The left recess in the base plate is
for a cutting angle of 45° .
Fig. B: Cutting width 2 cm
♦ Retighten the wing screw for the rip fence .
Connecting a dust extraction unit
♦ Attach the adapter for dust extraction to the
chip ejector .
Optional depending on the diameter of the dust
and sawdust extraction .
♦ Connect an approved dust and chip extraction
device .
NOTE
► When sawing wood or other materials that
create dusts that are hazardous to health,
always connect the appliance to a suitable,
certified suction appliance .
Use
Switching on and off
Switching on:
♦ Push the safety lock-out to the left or right
and keep it pressed .
♦ Press the ON/OFF switch . The LED work
light lights up . Once the saw is running, you
can release the safety lock-out .
Switching off:
♦ Release the ON/OFF switch .
Battery charge level
♦ The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Overload warning
♦ If the appliance is in danger of overloading,
the overload warning lights up briefly . The
appliance switches off .
IB_302329_PHKSA12A1_LB6-.indb 9 29.03.18 13:44