Parkside PBS 2 A1, Перевод оригинальной инструкции

Страница: 26 / 60

26
IE NI
Troubleshooting
Problem Possible cause Corrective action
Engine does
not start
Tank empty Fill with fuel
Incorrect starting sequence
Follow the instructions in this manual
on starting the machine
Engine “looded”
Remove some gas, start several
times; remove, clean and dry the
spark plug if necessary
Sooted spark plugs, incorrect spark
gap Clean, adjust or replace the spark
plugs
Spark connection, ignition cable
damaged
Replace
Carburettor jets dirty, incorrectly ad-
justed carburettor mix Have the carburettor cleaned and
adjusted by a specialist workshop
Blocked fuel ilter Replace or clean the fuel ilter
Engine ticks
over too
quickly
Engine cold Warm up slowly
Engine does
not give top
performance
Sooted spark plugs, incorrect spark
gap Clean, adjust or replace the spark
plugs
Dirty air ilter Clean or replace the air ilter
Carburettor jets dirty, incorrectly ad-
justed carburettor mix Have the carburettor cleaned and
adjusted by a specialist workshop
Incorrect fuel mix Fill up according to the instructions
Sealing ring in crank case leaking
Have the fault corrected by a spe-
cialist workshop
Cylinder, piston rings worn
Incorrect ignition
Excessive
formation
of exhaust/
smoke
Incorrectly adjusted carburettor mix
Have the carburettor cleaned and
adjusted by a specialist workshop
Incorrect fuel mix Fill up according to the instructions