Parkside PAHS 10.8 A1, Инструкции по эксплуатации и безопасности

Страница: 6 / 24

6 GB
Introduction / General safety advice for electrical power tools Introduction
Battery powered palm sander
PAHS 10.8 A1
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as descri-
bed and for the specified applications. If you pass
the product on to anyone else, please ensure that
you also pass on all the documentation with it.
Q
Proper use
This device – when combined with the appropriate
sandpaper – is suitable for dry-sanding wood, plas-
tic, metal, filler and painted surfaces. The device is
particularly suitable for corners, profiles or difficult to
access places. Any other use or modification to the
device shall be considered as improper use and
could give rise to considerable dangers. We will
not accept liability for loss or damage arising from
improper use. Not suitable for commercial use.
Features
1
Rechargeable battery pack
2
Battery pack release button
3
Adapter connection
4
Adapter for external dust extractionr
4a
Reducer
5a
Tab (dust box)
5b
Dust box for self-generated dust extraction
6
Dust box release button
7
Vents
8
Patented grinding plate (360° pivot)
9
ON / OFF switch
10
Rechargeable battery LED signals
11
Charge indicator red
12
Charge indicator green
13
Charger
Scope of delivery
1 Battery powered palm sander
3 Sanding sheets (60 / 120 / 180 grit)
1 Rechargeable battery pack
1 Charger
1 Adapter for external dust extraction with reducer
1 Dust box
1 Carrying case
1 Instructions for use
Technical Data
Battery powered palm sander PAHS 10.8 A1:
Rated speed: n
0
10000 rpm
Rated frequency: n
0
20000 rpm
Grinding plate: 360° pivot
Rechargeable Battery Pack PAHS 10.8 A1-1:
Type: LITHIUM-ION
Rated voltage:
10,8 V
Capacity: 1300 mAh
Charger PAHS 10.8 A1-3:
Input:
Rated voltage: 230‒240 V∼ 50 / 60 Hz
Rated current: 200 mA
Output:
Rated voltage: 13.2 V
Rated current: 450 mA
Charging time: approx. 3 h
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 73.4 dB(A)
Sound power level: 84.4 dB(A)
Uncertainty K:
3 dB
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
= 5.486 m / s
2
Uncertainty K = 1.5 m / s
2