Parkside 351903_2007, Перевод оригинальной инструкции

Страница: 29 / 190

29
IE GB
4) Power tool use and care:
a) Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and
off.
Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the
power source and/or the bat-
tery pack from the power tool
before making any adjust
-ments, changing accessories, or
storing power tools.
Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
d) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool’s
operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed.
Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
5) Careful handling and use of bat-
tery devices
a) Charge the batteries only in
chargers that are recommended
by the manufacturer.
Risk of fire if
a charger that is suitable for a specific
type of battery is used with other bat-
teries.
b) In the power tools, use only the
batteries designed for the pur-
pose.
The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts.
A short
circuit between the battery contacts
may cause burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water.
If the liquid gets into eyes,
seek medical assistance. Leaking bat-
tery fluid may cause skin irritations or
burns.
6) Service:
a) Have your power tool serviced
by a qualified repair person us
-
ing only identical replacement
parts.
This will ensure that the safety
of the power tool is maintained.