background image

For safety use, make sure the machine is cleaned every three-months. Before working, make sure to inspect the filter and 

the nozzle,and ensure there is no impurity. After working, make sure there is no water in the pump and the hose.   

If the machine needs to be repaired in the guarantee period, please return the machine to the shop. You need to provide 

the certificate of purchase in order to repair or get the substitute.

Before Packing, the machine should be cleaned, then use closed packaging, packaging should be firm. Store the machine 

in dry place. 

For transportation safety. The machine should comply with ISTA.

Meaning of crossed - out wheeled dustbin:

Do not dispose of electrical machines as unsorted municipal waste, use separate collection facilities.

If electrical machines are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get 

into the food chain, damaging your health and well-being.

When replacing old machines with new ones, the retailer is legally obligated to take back your old machine for disposals 

at least free of charge.

INSPECTION & MAINTENANCE

 

Содержание PRO-40SUM



















Отзывы: