Service/Spare Parts Manual
Series V12
MSG30-5506-M1/UK
4
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
Assembling, shaft package
1. Press down the big tappered roller bearing and the
inner ring for the roller bearing in two steps.
Note:
On V12-060 there is a distance between the be-
arings.
2. Press down the roller bearing with the text upwards
into the flange and assemble it on the shaft package.
3. Assemble the bearing ring with the text downwards.
4. Assemble the shim.
Assembling, shaft package
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
5. Assemble the retaining ring. Make sure it is all the
way into the groove. Check the pre-load of the bea-
rings, not to tight and no back-lash.
6. Assemble the O-ring.
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
4
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
Assembling, shaft package
1. Press down the big tappered roller bearing
and the inner ring for the roller bearing in two
steps.
Note!
On V12-060 there is a distance
between the bearings.
2. Press down the roller bearing with the text
upwards into the flange and assemble it on
the shaft package.
3. Assemble the bearing ring with the text
downwards.
4. Assemble the shim.
5. Assemble the retaining ring. Make sure
it is all the way into the groove. Check the
pre-load of the bearings, not to tight and no
back-lash.
6. Assemble the O-ring.
