Parker V12 Series, Руководство по обслуживанию

Страница: 13 / 32

Service/Spare Parts Manual
Series V12
MSG30-5506-M1/UK
13
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Aassembling, end cap
13 Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
37. Assemble the control cover assy. Make
sure the O-rings and check valve balls are in
correct position.
38. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not
to damage the O-ring.
40. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
41. Assemble the valve segment in the end
cap. The slot in the valve segment against
the cover side.
Assembling, end cap (new version)
13 Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
37. Assemble the control cover assy. Make
sure the O-rings and check valve balls are in
correct position.
38. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not
to damage the O-ring.
40. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
41. Assemble the valve segment in the end
cap. The slot in the valve segment against
the cover side.
Assembling, end cap (new version)
Assembling, end cap (new version)
37. Assemble the control cover assy. Make sure
the O-rings and check valve balls are in cor-
rect position.
38. Torque the screws to 65±10 Nm for V12-60 – -110,
105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not to
damage the O-ring.
40. Torque the screws to 65±10 Nm for V12-60 – -110,
105±20 Nm for V12-160.
13 Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
37. Assemble the control cover assy. Make
sure the O-rings and check valve balls are in
correct position.
38. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not
to damage the O-ring.
40. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
41. Assemble the valve segment in the end
cap. The slot in the valve segment against
the cover side.
Assembling, end cap (new version)
13 Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
37. Assemble the control cover assy. Make
sure the O-rings and check valve balls are in
correct position.
38. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not
to damage the O-ring.
40. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
41. Assemble the valve segment in the end
cap. The slot in the valve segment against
the cover side.
Assembling, end cap (new version)
41. Assemble the valve segment in the end cap.
The slot in the valve segment against the co-
ver side.
13 Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V12
HY30-5506-M1/UK
37. Assemble the control cover assy. Make
sure the O-rings and check valve balls are in
correct position.
38. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
39. Assemble the cover assy. Make sure not
to damage the O-ring.
40. Torque the screws to 65±10 Nm for
V12-60 -- 110, 105±20 Nm for V12-160.
41. Assemble the valve segment in the end
cap. The slot in the valve segment against
the cover side.
Assembling, end cap (new version)