Parker V12 Series Скачать руководство пользователя страница 5

Страница: 5 / 32

Service/Spare Parts Manual

Series V12

MSG30-5506-M1/UK

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Assembling, shaft package

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

Assembling, shaft package, cylinder barrel, joint shaft and cover

7. Press down the shafts seal in the seal carrier and as-

semble the retaining ring.

8. Assemble the seal carrier with shaft seal and the re-

taining ring. Make sure it is all the way into the groove.

9. Assemble the guide pins.

10. Assemble the sliding plate.

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

11. Assemble the joint rollers on the joint shaft. Make

sure the step on the joint rollers is fitted inwards.

12. Assemble the displacement setting screw, seal nut

and the O-ring.

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

Parker Hannifin

Pump and Motor Division

Trollhättan, Sweden

Service Manual

Series V12

HY30-5506-M1/UK

7. Press down the shafts seal in the seal car-

rier and assemble the retaining ring.

8. Assemble the seal carrier with shaft seal

and the retaining ring. Make sure it is all the

way into the groove.

Assembling, shaft package, cylinder barrel, joint shaft and cover

9. Assemble the guide pins.

10. Assemble the sliding plate.

11. Assemble the joint rollers on the joint

shaft. Make sure the step on the joint rollers

is fitted inwards.

12. Assemble the displacement setting screw,

seal nut and the O-ring.

Содержание V12 Series

































Результаты поиска

Содержание V12 Series

Отзывы:

Похожие инструкции для V12 Series

Бренды по названию

Популярные бренды

Parker V12 Series, Руководство по обслуживанию

Результаты поиска

Содержание V12 Series

Отзывы:

Похожие инструкции для V12 Series

Бренды по названию

Популярные бренды