Parker Sporlan PSK Series, Руководство пользователя

Страница: 7 / 44

Bulletin 100-50-6.1 – Page 3
7 WORKING SETPOINTS and CONFIGURATION PARAMETERS
7.1 Working setpoints
7.2 Configuration parameters
Minimum Maximum U.M. PSK201 Working Setpoints
r1 r2 °C/°F 0.0 working setpoints
Parameters Minimum Maximum U.M. PSK201 Working Setpoints
SP r1 r2 °C/°F 0.0 working setpoints
Parameters Minimum Maximum U.M. PSK201 Temperature Inputs
CA1 -25.0 25.0 °C/°F 0.0 cabinet probe offset
P0 0 1 — 1
kind of probe
0 = PTC
1 = NTC
P1 0 1 — 1
display decimal point value during normal operation (Celsius mode only)
1 = YES
P2 0 1 — 0
unit of measure, temperature
0 = °C
1 = °F
Parameters Minimum Maximum U.M. PSK201 Setpoints
r0 0.1 15.0 °C/°F 2.0 working setpoint differential
r1 -99.0 r2 °C/°F -50.0 minimum working setpoint
r2 r1 99.0 °C/°F 50.0 maximum working setpoint
Parameters Minimum Maximum U.M. PSK201 Compressor Protections
C0 0 240 min 0 compressor delay after turning on the controller
C2 0 240 min 3 minimum time the compressor remains turned off
Parameters Minimum Maximum U.M. PSK201 defrost
d0 0 99 h 8
defrost interval
0 = the defrost at intervals will never be activated
d3 0 99 min 30
defrost duration
0 = the defrost will never be activated
d4 0 1 — 0
defrost when you turn on the controller
1 = YES
d5 0 99 min 0 defrost delay when you turn on the controller (only if d4 = 1)
d6 0 1 — 1
temperature shown during the defrost
0 = cabinet temperature
1 = if, upon the activation of defrost, the cabinet temperature is below
“working se r0”, at most “working se r0”; if, upon the
activation of defrost, the cabinet temperature is above “working setpoint
+ r0”, at most the cabinet temperature to the defrost activation