Parker Sea Recovery Aquamatic, Быстрый старт и руководство по устранению неисправностей

Страница: 13 / 38

13
NOTE: It may take several minutes for UV Sterilizer to become active. The system must sense good
potable water for the icon to activate.
8. Press the Product Valve Icon to activate the Diversion valve.
NOTE: Once the UV system has completed its warm up cycle or once the controller has detected potable
water, the control system will make the 'Start|Stop Product Valve' button available.
NOTE: You may view the operation data on the right of the screen below or schematic view.
UV System
Control
(Shown if installed)
(Available but not active)
Product Valve
Control
(Available but not active)
Live System
Data
Alternative
Schematic View