Parker Sea Recovery Aquamatic, Быстрый старт и руководство по устранению неисправностей

Страница: 9 / 38

9
3.0 Manual Operation
The Aquamatic, Aquamatic XL and AquaWhisper DX desalination system controller provides two possible
methods of operation; these are manual mode and automatic mode. In manual mode, the controller
requires that the operator activate the relative pumps by pressing on the required pump operation icons.
If the user attempts to operate a pump when it is determined by the control system as unsafe to do so,
the controller will not allow such an action and will in some cases raise a warning message.
NOTE: Before attempting manual start up, it is important to check that all system feed and brine valves
are in the open position.
1. Press anywhere on the main splash screen to begin.
2. Press Operations icon shown below.
3. Press Manual Mode icon shown below.
NOTE: The Manual control screen displayed may vary from the examples shown below, depending on the
product model in use. To provide complete details, this manual will review the procedures needed
for operation of an Aquamatic, or Aquamatic XL system. Hence, this description will contain
automatic pressure regulation operation information that is not needed when operating an
AquaWhisper DX system.
Press Here
Press Here