Parker Pro Display 10, Инструкция, Страница: 41 / 53

Parker Pro Display 10 Instruction Book 41/53
Header Link to Contents
Table 26: C3, C4 and C6 Mating connector type to interface Pro Display into
system
Connector
type
Conn. Key Part number Conn. type Recommended
Cable
Hirschmann
EM12S
Octopus
Weidmuller
SAISM-4/8S-
M12-4P
D-COD
Harting
Harax M12L
Male, 4 poles,
D-coding
C3, C4, C6 D Hirschmann
934 445-001
Weidmuller
1892120000
Harting:
21 03 281 1405
21 03 881 1405 Straight
Conn. C3, C4:
USB 2.0 cable,
outer Ø 6…8 mm
Conn. C6: Cat 5e,
4 x 0,22mm²
(AWG24)
Harting
M12 Crimp,
shielded,
Male, 4 poles,
D-coding,
angled
C3, C4, C6 D Harting:
21 03 882 3405 Angled
Suitable “M12 male D-coded 4pin”- connectors are also available from several other
manufacturers.
Ethernet cable is available from Parker – see Appendix C for ordering codes.
8.1.5. Micro SD card interface
Micro SD is possible to use as mass storage of media with Pro Display. This connection
is sealed with a cover plug on the rear side of the unit to maintain the ingress protection
(IP) rating of the module.
The Pro Display Micro SD card interface is compliant with SD command/response sets
and a physical layer as defined in the SD Memory Card Specifications, v3.0 including
high-capacity SDHC cards up to 32GB.
Figure 26: The Micro SD card slot in the rear side of the Pro
Display unit. This slot shall be always protected with a cover
plug that is part of the Pro Display unit assembly.