Parker Pro Display 10 Instruction Book
28/53
Display device. Each UXP application is certified for a certain System ID. The device
refuses to install applications that are not signed by the System ID owner for the same
System ID which is installed in Pro Display device. The customer needs to request their
own System ID from Parker by following a process defined in the
System Certification
Guide (HY33-4812-SCG/UK)
.
All production units are delivered without System ID.
When the device is booted for
the first time, it will allow the user to install the System ID. It is not possible to install
applications before System ID is installed.
Pro Display development unit
(88PROD10AD10) is intended only for development
purposes. The specific open System ID is pre-installed on the development unit. It is
possible to install non-certified applications on development devices. Certified
applications cannot be installed on a development device.
Figure 14: Installing packages – overview
5.4. Installing and removing applications
Certified packages can be installed into Parker Pro Display with the Parker Maintenance
App. With this app, you can install new apps, update existing apps and remove
unnecessary apps, as well as view current software versions.
It is possible for an application developer to create their own maintenance functionality
with the UXP installer framework.
Primary software installation media in Pro Display is USB. Refer to chapter 4.6.2. USB
for obtaining a suitable M12 to USB connection cable in order to attach the USB stick to
the Pro Display unit.