3 - EN
1 Safety
Information
Important: Do not operate this equipment until the safety information and instructions in this user guide have been read and
understood by all personnel concerned.
WARNING - USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system
options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring
that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of
the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any
other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications
provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and
reasonably foreseeable uses of the components or systems.
This equipment is intended to be operated indoors and is designed to produce high purity nitrogen gas from a supply of clean dry compressed air.
Please refer to the technical specification for pressure, temperature, and compressed air requirements.
Do not connect liquids or gases or to the inlet port of this generator.
Use of the equipment in a manner not specified within this user guide may result in an unplanned release of pressure, which may cause serious
personal injury or damage.
Only competent personnel trained, qualified, and approved by Parker domnick hunter should perform installation, commissioning, service and
repair procedures.
When handling, installing or operating this equipment, personnel must employ safe engineering practices and observe all related regulations,
health & safety procedures, and legal requirements for safety.
Ensure that the equipment is depressurised and electrically isolated, prior to carrying out any of the scheduled maintenance instructions specified
within this user guide.
Note: Any interference with the calibration warning labels will invalidate the gas generator’s warranty and may incur costs for the re-calibration of
the gas generator.
Parker domnick hunter
can not anticipate every possible circumstance which may represent a potential hazard. The warnings in this manual
cover the most known potential hazards, but by definition can not be all-inclusive. If the user employs an operating procedure, item of equipment
or a method of working which is not specifically recommended by Parker domnick hunter the user must ensure that the equipment will not be
damaged or become hazardous to persons or property.
Most accidents that occur during the operation and maintenance of machinery are the result of failure to observe basic safety rules and
procedures. Accidents can be avoided by recognising that any machinery is potentially hazardous.
Details of your nearest
Parker domnick hunter
sales office can be found at
www.parker.com/dhfns
Retain this manual for future reference.
