Parker NitroFlow Basic Series, Руководство пользователя

Страница: 30 / 36

K3.1.114o Manual NitroFlow Mobile - 29 -
What happens Alarm description Default
Oxygen level too high O2 high Off
Oxygen level too low O2 low Off
Inlet pressure too high P-inlet high Off
Inlet pressure too low P-inlet low Off
Outlet pressure too high P-outlet high Off
Outlet pressure too low P-outlet low Off
Inlet temperature too high T-inlet high On
Inlet temperature too low T-inlet low On
Membrane pressure sensor fails P-mem sensor fail On
Outlet pressure sensor fails P-Outlet sensor fail On
Inlet temperature sensor fails T-Inlet sensor fail On
Status of temperature of compressor box 1 Temp comp1 On
Status of temperature of compressor box 2 Temp comp2 On
Oxygen sensor needs to be calibrated Calibrate O2 cel On
When an alarm is displayed there are two options:
1. Accept
2. Reset
When ACCEPT is touched, the alarm sound will disappear while the alarm level is still exceeded. If the alarm is not
resolved the alarm message will appear again in 24 hours. This function gives you some time to work on the
solution.
When RESET is touched the alarm status is cleared. However, if the alarm still exist it will appear again after the
delay time that has been entered in the alarm settings menu (refer to § 6.3.2) has passed.